Ready to install your Lonseal flooring? Tensorgrip P809 RV Flooring Adhesive is easy to use and install in vans, RVs, boats, trailers and more. This 5.8G canister has all the advantages of an aerosol spray can in an industrial-size canister.
Tensorgrip® P809 is a revolutionary high-performance, plasticizer resistant adhesive, specially formulated for bonding vinyl, rubber and plastics. Tensorgrip P809 RV Flooring Adhesive is a cross-linking contact adhesive which is fully California-compliant. Like epoxy, this contact adhesive chemically reacts to create a permanent bond.
Resists weathering, water, fuel, oil and many other plasticizers
Bonds to damp surfaces (moisture cure)
Semi-repositionable
Application Information:
TensorGrip® P809 is designed as a portable, self- contained spray system for field or shop applications.
Apply adhesive to both surfaces to be mated, at 80% to 100% coverage.
Allow 3-5 minutes or until just slightly sticky, but not longer than 20 minutes before mating substrates.
Parts should be mated with as much pressure as practical. Ensure 80-100% coverage with spray pattern.
Within one to two hours, bond is strong enough to allow cutting or trimming, although ultimate strength is achieved in 1-3 days.
Canister system will spray adequately above 60oF. Canister system should be kept in warm area. In the event that the canister gets abnormally chilled, freezes or gives poor or sputtering spray, it should be warmed up before continued usage. Warming canister by immersion in warm water is recommended.
NOTE: Always store above 60°F/15°C. Do not store at temperatures over 120F. Do not store directly on concrete floor.
Shipping is a flat rate of $20 on all orders to customers within the United States! We don't want to mess around with fine print and extra charges, we like things to be simple and easy.
Ready to install your Lonseal flooring? Tensorgrip P809 RV Flooring Adhesive is easy to use and install in vans, RVs, boats, trailers and more. This 5.8G canister has all the advantages of an aerosol spray can in an industrial-size canister.
Tensorgrip® P809 is a revolutionary high-performance, plasticizer resistant adhesive, specially formulated for bonding vinyl, rubber and plastics. Tensorgrip P809 RV Flooring Adhesive is a cross-linking contact adhesive which is fully California-compliant. Like epoxy, this contact adhesive chemically reacts to create a permanent bond.
Resists weathering, water, fuel, oil and many other plasticizers
Bonds to damp surfaces (moisture cure)
Semi-repositionable
Application Information:
TensorGrip® P809 is designed as a portable, self- contained spray system for field or shop applications.
Apply adhesive to both surfaces to be mated, at 80% to 100% coverage.
Allow 3-5 minutes or until just slightly sticky, but not longer than 20 minutes before mating substrates.
Parts should be mated with as much pressure as practical. Ensure 80-100% coverage with spray pattern.
Within one to two hours, bond is strong enough to allow cutting or trimming, although ultimate strength is achieved in 1-3 days.
Canister system will spray adequately above 60oF. Canister system should be kept in warm area. In the event that the canister gets abnormally chilled, freezes or gives poor or sputtering spray, it should be warmed up before continued usage. Warming canister by immersion in warm water is recommended.
NOTE: Always store above 60°F/15°C. Do not store at temperatures over 120F. Do not store directly on concrete floor.
Shipping is a flat rate of $20 on all orders to customers within the United States! We don't want to mess around with fine print and extra charges, we like things to be simple and easy.
